Electrostatic digital printing is used by laserjet printers. The Laserjet printer prints text and graphics in excellent quality. The printer may be set up on both Windows and Mac. Make sure you have the Wi-Fi network credentials on hand before starting with the HP Laserjet Pro Wi-Fi connection. A computer linked to the Wi-Fi network to which you want to connect the HP LaserJet Pro Printer setup is also required. To acquire the wireless network settings through the USB cable connection, some HP Laserjet Pro printers require you to temporarily connect a USB cable between the printer and the computer.
Quick Steps To Set Up The Printer On The Windows And Mac System
Follow these steps to install the printer on a Windows computer.
Make preparations for the installation.
The wireless network is connected.
The driver is being downloaded and installed.
To set up the printer on the Mac system, follow the steps below.
Make preparations for the installation.
Connect to the Internet using a wireless network.
Install the printer driver if necessary.
How do you install an HP laser printer?
Not only will you learn How To Setup Your HP LaserJet Pro Printer to a wireless network, but you'll also learn how to get the printer driver from HP's main website. When requested at the time of installation, select wireless as the connection type.
You can install the software on your system in one of two ways: by downloading it from the HP website or by using an installation CD. Read over both methods to determine which one you wish to utilise for installation.
CD: Using an installation disc for installation is quite quick and straightforward, and it does not necessitate a lengthy procedure. Even if you have a fresh printer, the CD you use may not have the most recent software.
Another option is to go to HP's main website and download the most recent printer software. This is a more time-consuming process than installing software from a CD. It does, however, aid in the avoidance of installation-related complications.
Connect Your HP Printer Device to the Wireless Network
Connect your printer device via Wi-Fi protected setup so that the installer can locate the printer during installation. Check the handbook for your router to see if it supports WPS connections. If your access point doesn't support the WPS connection type, continue to the next step to download and install the driver. If your router device supports WPS, then follow these instructions.
Hold the Wi-Fi button on the control panel of your printer.
When you release the button, the Wi-Fi light will begin to flash.
After 2 minutes, push and quickly release the WPS button on your router.
Allow some time for the connection between your router and printer to establish.
The wireless light on your printer device will turn n and then become steady once it is linked to the network.
Thanks a lot for sharing this step by step guide but I will not use these steps because I am using enterprise cloud to connect printer with my devices. This is one of the easiest and best method.
Place the printer near the Wi-Fi router.
Put the printer in WPS connection mode. ...
Within two minutes, press and hold the WPS button on the router until the connection process begins.
Regards, J wick