Take out the printer from the sealed box with all its key components i.e. cables, cartridges, etc.
The next thing to do is, remove the polystyrene packaging wraps with the orange tapes along with the plastic covering from the printer.
The first thing for hardware setup is to find out the power socket on the printer. As mentioned in Canon Ij Setup guide, plug the power cable to the wall socket and then to the printer’s port.
After that, switch the printer on by pressing the power button. And you will find the printer’s display light on.
For inserting the ink tanks, remove the cartridges outlet seal and the plastic covers covering it.
The printhead carriage will adjust itself once you open the top cover of the printer. Put all the cartridges and put them into their correct slots.
After putting the cartridges into the slots, close the printer top cover and suddenly you will observe that the printer will start making noise. This is the indication that ink cartridge installation is successfully done.
After then, open the flap of the printer and then pull out the input tray and then, put some pages into the paper tray.
Put the paper tray back to its place properly.
This finally finishes the configuration of your Canon Printer via canon.com/ijsetup.
Canon printers can be used for the various purpose, and that includes the printing, scanning and faxing operations. Make sure that you operate the printer carefully and you will be able to use the printer more efficiently. Make sure that you follow through the steps below to unbox it.
Take the printer out from the box and place it over a flat surface.
Place the printer nearby a wall outlet.
Remove the protective tapes from the printer.
Remove off the protective film from the printer’s control screen.
Take the power cord out of the box and insert into the printer.
Regards, J Wick